Anritsu ML2430A - Manual (Page 18)

ML2400A-03 Rack
Mount Installation
This section describes the assembly procedure for fitting two ML2430A Power
Meters (PM) into a instrument rack. The PM’s must be fitted with rack mount top
and bottom covers for the rack mount kit to be fitted. The procedure involves fit-
ting support brackets, two front handles, and two rear support brackets, one to
each PM. The two PM,s which are locked together can then be loaded and se-
cured in the rack position desired. This assembly procedure also provides assem-
bly instructions for fitting a ML2430A to a HP34401A Multimeter and a MF2412A
Microwave Frequency Counter.
The required parts and tools are listed below:
2-6 ML2430A OM
RACK MOUNTING INSTALLATION
Quantity
(each)
Description
Anritsu Part
Number
Max. Torque
Setting
2 HANDLE, PULL, CHASSIS, PLASTIC,
HARDWARE 783-1055
4 SPEED NUT 790-319
16 WASHER, 6-32UNC, OVERSIZE 900-345
4 M4, 8.00 MM, PHH, SCREW, FLAT HEAD 900-795
4 DECORATIVE SCREW 900-821
16 M3X8, POS, SST, PATCHLOCK, SCREW, MET-
RIC, PAN HEAD 905-68 .4lbf.in
[45cN m]
4 M3X6, POS, SST, PATCHLOCK, SCREW, MET-
RIC, FLAT HEAD 905-69
4 WASHER, M4 SPLIT. 900-807
2 M4X12MM, SCREW, PAN HD 900-806
2 M3.5X8MM, SCREW, PAN HD 905-103
4 M4X10MM, SCREW, FLT HD 905-63
1 RACK MOUNT, SIDE BRACKET 49415
1 RACK MOUNT, CENTRE, FRT, BRACKET 49413
1 SPACER PLATE 49439
1 RACK MOUNT, CENTER, FRONT, BRACKET C37275
2 RACK MOUNT, SIDE, BRACKET C37276
1 RACK MOUNT, CENTER, BRACKET C37277
1 RACK MOUNT, CENTER, BRACKET C37279
2 REAR SUPPORT, BRACKET, RACK MOUNT C41449
2 POWER METER FITTED WITH RACK MOUNT
TOP
Table 2-2 ML2430A-03 Rack Mount Kit Parts List