Anritsu ML2430A - Manual (Page 196)

terminator: %
PCT
EN
Remarks: The calibration factor compensates for mismatch losses and effective effi-
ciency over the frequency range of the power sensor.
Example: KB99.9%
KB99.9PCT
KB99.9EN
LG Set log units
Syntax: LG
Remarks: Changes the display to log units (dBm).
LH Set high limit
Syntax: LH<val>EN
val: –99.999 to +99.999 (dBm only)
Remarks: Sets the high limit.
Example: LH30.00EN
LL Set low limit
Syntax: LL<val>EN
val: –99.999 to +99.999 (dBm only)
Remarks: Sets the low limit.
Example: LL20.00EN
LM limits check state
Syntax: LM<state>
state: 0 (off) or 1 (on)
Remarks: Turns limit checking on or off.
ML2430A OM 6-109
GPIB OPERATION HP 437B EMULATION COMMANDS