Lull 944E-42 Service Manual - Manual (Page 131)

4.27 Model 644E-42/944E-42 Rev. 6/04
Cab and Covers
5. Connect heater wiring (10) to the cab harness (11).
6. Install the seat mounting panel (12) using the two
capscrews (13) and flat washers (14). Torque
capscrews to 6.6 lb-ft (9 Nm).
7. Install the operators seat. Refer to Section 4.3.1, b.
“Seat Installation.”
8. Install the right side console access panel (15) using
five capscrews (16) and flat washers (17). Torque
capscrews to 7 - 8 lb-ft (9,5 - 10,6 Nm).
9. Refill the cooling system. Refer to Section 7.6.3,
“Drain and Flush Radiator,” for proper refill and
testing instructions.
SU0170
10
11
MU5900
12
13
14
~
SU0060
15
16
17
~