Fluids, lubricants and capacities, Axles (differential housings), Wheel ends – Lull 944E-42 Service Manual User Manual

Page 39: To section 2.6.1, “axles (differential housings), To section 2.6.2, “wheel ends

Advertising
background image

2.23

Model 644E-42/944E-42

Rev. 6/04

General Information, Specifications and Maintenance

2.6

FLUIDS, LUBRICANTS AND
CAPACITIES

2.6.1

Axles (Differential Housings)

a. Axle Lubricants

In general, use a Universal Tractor Fluid that meets the
following specifications:

Nominal viscosity at 104° F (40° C)....................... 55 cSt

Minimum viscosity at 212° F (100° C) .................. 9.1 cSt

Pour point (Maximum) .............................. -32° F (-36° C)

Flash point (Minimum) ............................ 392° F (200° C)

Minimum viscosity index............................................ 135

b. Axle Capacities

Axles, Front/Rear - 644E-42..................... 9.5 qt (9 liters)

Axles, Front - 944E-42 ......................... 10.6 qt (10 liters)

Axles, Rear - 944E-42 .............................. 9.5 qt (9 liters)

2.6.2

Wheel Ends

a. Wheel-End Lubricants

In general, use a Universal Tractor Fluid that meets the
following specifications:

Nominal viscosity at 104° F (40° C) .......................55 cSt

Minimum viscosity at 212° F (10° C) .....................9.1 cSt

Pour point (Maximum).............................. -32° F (-36° C)

Flash point (Minimum).............................392° F (200° C)

Minimum viscosity index ............................................135

DO NOT add additional friction modifier to factory-filled
wheel ends. All wheel ends are factory-filled by the
manufacturer with oil. If a wheel end is drained for
service, it should be refilled with the gear oils listed.

Note: DO NOT use synthetic oil without the express
written consent of the manufacturer.

b. Wheel-End Capacity

Wheel-Ends, Front/Rear - 644E-42........1.7 qt (1,6 liters)

Wheel-Ends, Front - 944E-42 ................1.3 qt (1,2 liters)

Wheel-Ends, Rear - 944E-42 .................1.7 qt (1,6 liters)

Approved Universal Tractor Fluid

John Deere

JDM J20C (HY-GARD)

Ford/New Holland

ESN-M2C134-D
(HYDRAULIC OIL 134)

Massey-Ferguson

M-1141 (PERMANTRAN III)

Chevron

CHEVRON 1000 THF

Approved Universal Tractor Fluid

John Deere

JDM J20C (HY-GARD)

Ford/New Holland

ESN-M2C134-D
(HYDRAULIC OIL 134)

Massey-Ferguson

M-1141 (PERMANTRAN III)

Chevron

CHEVRON 1000 THF

Advertising
This manual is related to the following products: