Lull 944E-42 Service Manual - Manual (Page 59)

3.11 Model 644E-42/944E-42 Rev. 6/04
Boom
3. Coat the capscrew (8) with Loctite ® 242 (blue). At the
rear of the inner boom (5), attach the retract chain (6)
to the same hole in the anchor link (7) using one
capscrew (8), one flat washer (9). Torque capscrew
to, 37 - 66 lb-ft (50 - 90 Nm).
4. (644E-42 Only) Replace the rear inner boom top
wear pads (6), side wear pads (7), bottom wear pads
(8), shims (9), hose clamp mounts (11), washers
(10) and capscrews (12) according to their
previously marked positions. Coat the wear pad
capscrews with Loctite
®
242 (blue). Torque
capscrews (12) to, 34 - 38 lb-ft (46 - 52 Nm).
(944E-42 Only) Replace the rear inner boom top
wear pads (13), side wear pads (14), bottom wear
pads (15), shims (16), hose clamp mounts (17),
washers (18) and capscrews (19) according to their
previously marked positions. Coat the wear pad
capscrews with Loctite
®
242 (blue). Torque
capscrews (19) to, 34 - 38 lb-ft (46 - 52 Nm).
MU0260
5
6
7
9
8
MU1040
6
7
8
9
10
12
9
12
11
11
MU5060
13
14 15
16
17
19
16
19
18
19