Lull 944E-42 Service Manual - Manual (Page 143)

4.39 Model 644E-42/944E-42 Rev. 6/04
Cab and Covers
7. Remove the bottom spring clip (11) from the stud
ball (12) and disconnect the left support strut (10)
from the stud ball (12). Save parts for reassembly.
8. Gently strike the top of the right support strut (13)
away from the stud ball (14) to pop the right support
strut (13) off the stud ball (14).
9. Gently strike the bottom of the right support
strut (13) away from the stud ball (15) to pop the
right support strut (13) off the stud ball (15).
10. If required, remove the two stud balls (9 and 14) from
the strut bracket (16) on the engine hood (7).
11. If required, remove the two stud balls (22) on the
engine compartment strut bracket (23) and the two
capscrews (24) and washers (25) securing the strut
bracket (23) to the engine mount frame.
12. Close the engine hood (7).
13. From the top back of the engine hood, remove three
capscrews (26) and washers (27) from the two
hinges (28) on the engine firewall (29).
14. Lift the engine hood (30) off of the engine mount
frame (31) and lower to the ground.
15. If required, remove the two capscrews (32),
shims (33), latch (34) and nut plate (35) from the
engine mount frame (36).
MU4980
22 23
24
25
22
MU4990
26
27
28
29
31
30
MU5000
32
33
34
35
36