Lull 944E-42 Service Manual - Manual (Page 134)

Cab and Covers
4.30 Model 644E-42/944E-42 Rev. 6/04
10. (644E Only) Remove the clevis pin clip (1) from the
throttle cable yoke (2). Remove throttle cable (3)
from the throttle pedal lever (4). Remove the screws
(5), locknuts (6) and clamps (7) securing the throttle
cable (3) to the cab pedal bracket (8). Remove the
throttle cable from the cab.
11. If equipped, disconnect heating and air conditioning
hoses and electrical connections. Refer to Section
4.4.8, “Heater/Defroster System.”
12. Remove the two capscrews (9) securing the
mirror (10) to the left side of the cab. Remove the
mirror.
13. Remove the four capscrews (13), four washers (14)
and four sheer pins (15) that secure the cab mount
supports (11 and 12) to the frame.
14. If equipped, remove skylight glass. Refer to Section
4.3.12, “Enclosed Cab Components.”
15. Use a suitable overhead lifting device and attach to
the top of the cab.
MU4850
1
2
5
6
7
3
8
4
MU6040 9
10
WARNING:
Wear protective footwear
with reinforced toe caps and slip-resistant
soles. Failure to comply can result in foot injury
from falling objects or other bodily injury from
slipping or falling.
WARNING:
NEVER lift a heavy object
without the help of at least one assistant or a
suitable sling or hoist. Failure to comply can
result in death or serious personal injury.
MU5020
13
14 15
14
15
11 16
17
18
17
16
18
17
12