Lull 944E-42 Service Manual - Manual (Page 136)

Cab and Covers
4.32 Model 644E-42/944E-42 Rev. 6/04
11. Connect all of the electrical connections (1) that run
from the cab out to the frame and engine
compartment.
12. Install the right side console access panel (2) using
capscrews and flat washers. Torque capscrews to
7 - 8 lb-ft (9,5 - 10,6 Nm).
13. Connect the supply and return fuel lines (3) at the
fuel tank (4). (Refer to Section 7.8.2, “Fuel Tank.”)
14. Connect the electrical connection to the fuel level
sending unit (5).
15. If equipped, connect heating and air conditioning
hoses and electrical connections. Refer to Section
4.4.8, “Heater/Defroster System.”
1
MU4890
MU3880
~
2
MU5010
3
4
5