Lull 944E-42 Service Manual User Manual

Page 193

Advertising
background image

6.17

Model 644E-42/944E-42

Rev. 6/04

Transmission: ZF 4WG-92/98 TSC & Transfer Case: ZF TB92-I4

5. Transmission overheating

(oil above 248° F [120° C]).

1. Low oil level.

2. Clogged radiator.

3. Transmission filled with incorrect

oil, or oil contaminated.

4. Excessive “roading.”

5. Restriction in oil cooler hoses.

6. Pump worn or damaged.

7. Engine thermostat stuck.

1. Fill transmission to correct level

with Universal Tractor Fluid.
(Refer to the appropriate
Owners/Operators Manual.)

2. Remove debris from the

radiator.

3. Drain transmission and fill to

correct level with Universal
Tractor Fluid. (Refer to the
appropriate Owners/Operators
Manual.)

4. Stop and idle the engine.

5. Replace cooler hoses.

6. Repair or replace pump

assembly.

7. Replace engine thermostat.

(Refer to Section 7.6.2,
“Thermostat Replacement.”
)

6. Grinding or “clunking” noise

from transmission.

1. Oil level too low.

2. Transmission filled with incorrect

oil.

3. Incorrect clutch engagement.

4. Internal damage.

5. Broken diaphragm (flex plate).

6. Loose diaphragm (flex plate)

mounting capscrews.

1. Fill oil to correct level. (Refer to

the appropriate Owners/
Operators Manual.)

2. Drain transmission and fill to

correct level with Universal
Tractor Fluid. (Refer to the
appropriate Owners/Operators
Manual.)

3. Refer to Section 9.14.9,

“Transmission Solenoid Valves.”

4. Repair or replace parts as

needed.

5. Replace diaphragm (flex plate).

Section 6.7.1, “Transmission
Removal.”

6. Tighten capscrews.

6.8.1

Transmission Troubleshooting (Continued)

Problem

Cause

Remedy

Advertising
This manual is related to the following products: