Performance specifications, Hydraulic cylinder performance specifications – Lull 944E-42 Service Manual User Manual

Page 30

Advertising
background image

General Information, Specifications and Maintenance

2.14

Model 644E-42/944E-42

Rev. 6/04

2.5.5

Performance Specifications

Note: Performance criteria is based on full throttle engine speed unless otherwise specified or not applicable.

2.5.6

Hydraulic Cylinder Performance Specifications

Note: Vehicle with no load, engine at full throttle, hydraulic oil above 130° F (54° C) minimum, engine at operating
temperature

.

Travel Speed (Standard Tires, No Load)

644E-42

944E-42

First Gear

0 - 3.5 mph (0-5,6 km/hr)

0 - 3.5 mph (0-5,6 km/hr)

Second Gear

0 - 6.0 mph (0-9,7 km/hr)

0 - 6.0 mph (0-9,7 km/hr)

Third Gear

0 - 14 mph (0-23 km/hr)

0 - 14 mph (0-23 km/hr)

Fourth Gear

0 - 20 mph (0-32 km/hr)

0 - 20 mph (0-32 km/hr)

Function

Approximate Times

Boom Extend

11 to 15 seconds

Boom Retract

13 to 17 seconds

Boom Lift Retracted

11 to 15 seconds

Boom Lower Retracted

11 to 15 seconds

Attachment Tilt - UP

2.5 to 4.5 seconds

Attachment Tilt - DOWN

3 to 5 seconds

Transfer Carriage Forward with Boom Retracted and Level

9 to 14 seconds

Transfer Carriage Rearward with Boom Retracted and Level

9 to 13 seconds

Frame Sway Left to Right with Boom Down

12 to 17 seconds

Frame Sway Left to Right with Boom Above 40

°

and Emergency Brake Engaged

28 to 37 seconds

Frame Sway Right to Left with Boom Down

12 to 17 seconds

Frame Sway Right to Left with Boom Above 40

°

and Emergency Brake Engaged

30 to 36 seconds

Advertising
This manual is related to the following products: