API Audio 1608 Automation - Manual (Page 131)

3. Highlight “System Menu” using the Jog-Wheel and press the SEL (Select)
button. The System Menu will open.
4. Highlight “General Config” and press the SEL (Select) button. The General
Config dialog box will open.
5. Highlight the “Freewheel” pull-down menu and press the SEL (Select) button
to activate the menu.
6. Use the Jog-Wheel to highlight the needed number of freewheel frames (1-
15).
7. Press the SEL (Select) button to select the highlighted timecode source.
8. Set other general configuration parameters as needed.
9. Highlight the “OK” button and press the SEL (Select) button to apply the
selected timecode source and other general configuration parameters.
16.3.3.4 Default Timecode Frame Rate
The default timecode frame rate for new projects must be selected.
To select the default timecode frame rate, use the following procedure:
1. Press the STATUS PAGE button to open the Status Page.
2. Press the MENU button to open the Main Menu.
3. Highlight “System Menu” using the Jog-Wheel and press the SEL (Select)
button. The System Menu will open.
4. Highlight “General Config” and press the SEL (Select) button. The General
Config dialog box will open.
5. Highlight the “Default TC” pull-down menu and press the SEL (Select)
button to activate the menu.
6. Use the Jog-Wheel to highlight the needed timecode frame rate (23.976, 24,
25, 29.97, 29.97 drop, or 30).
7. Press the SEL (Select) button to select the highlighted default timecode
frame rate.
8. Set other general configuration parameters as needed.
9. Highlight the “OK” button and press the SEL (Select) button to apply the
selected default timecode frame rate and other general configuration
parameters.
16.3.4 Set Date and Time
The system clock must be set to the time, day, month, and year. This time and date is
used to timestamp new folders and files.
To select the set the system date and time, use the following procedure:
1. Press the STATUS PAGE button to open the Status Page.
2. Press the MENU button to open the Main Menu.
3. Highlight “System Menu” using the Jog-Wheel and press the SEL (Select) button.
The System Menu will open.