API Audio 1608 Automation - Manual (Page 93)

12.6.4 Delete a Group
To delete a group, perform the following procedure:
1. Press the PROJECT PAGES button 1 to 3 times to open the Groups Page.
2. Use the Jog-Wheel to highlight the group to be deleted.
3. Press the MENU button to open the Groups Menu.
4. Highlight “Delete Group” and press the SEL (Select) button. A confirmation dialog
box will open.
5. Highlight “Yes” and press the SEL (Select) to delete the highlighted group.
6. The confirmation dialog box will close and the deleted group will disappear from the
Groups Page. If a project is open, a new mix without the deleted group will appear
in the Mix Tree and become the current mix.
12.6.5 Disable a Group
To “Disable” a group, perform the following procedure:
1. Press the PROJECT PAGES button 1 to 3 times to open the Groups Page.
2. Use the Jog-Wheel to highlight the group to be disabled.
3. Press the MENU button to open the Groups Menu.
4. Highlight “Disable Group” and press the SEL (Select) button.
5. The disabled group will appear dimmed (grey) on the Groups Page, indicating its
status. The group will cease to operate. Since the group can be easily re-enabled, a
new mix is not created in the Mix Tree.
12.6.6 Enable a Disabled Group
To “Enable” a disabled group, perform the following procedure:
1. Press the PROJECT PAGES button 1 to 3 times to open the Groups Page.
2. Use the Jog-Wheel to highlight the group to be enabled.
3. Press the MENU button to open the Groups Menu.
4. Highlight “Enable Group” and press the SEL (Select) button.
5. The enabled group will appear normal on the Groups Page and will resume normal
operation. A new mix will not be created in the Mix Tree.
12.6.7 Coalesce a Group
To “Coalesce and Delete” a group, perform the following procedure:
1. Press the PROJECT PAGES button 1 to 3 times to open the Groups Page.
2. Use the Jog-Wheel to highlight the group to be coalesced and deleted.
3. Press the MENU button to open the Groups Menu.
4. Highlight ““Coalesce & Delete” and press the SEL (Select) button. A confirmation
dialog box will open.
5. Highlight “Yes” and press the SEL (Select) to coalesce the Master moves with the
Members and delete the highlighted group. The confirmation dialog box will close.