GAI-Tronics TMA Version 7.5.0 Telephone Management Application (TMA) User Guide (Ver. 7.5.0 and newer) - Manual (Page 48)

Pub. 42004-479B
Telephone Management Application (TMA) User Guide Page 45 of 128
e:\standard ioms - current release\42004 instr. manuals\42004-479b.doc
03/14
Version This is the version number of the individual phone’s firmware that is currently being used. This
text is grayed because it cannot be changed with TMA.
Date Created This is the date the phone was installed into the current database. This text is grayed
because it is not accessible for you to change.
TMA Call In Number This is the complete telephone number that the phone will dial to contact the
TMA software system. The number must be entered exactly as it will be dialed including any prefix for a
PBX and area codes.
Data Line Number The Data Line Number is the number to be dialed to call this installed phone. The
number must be entered exactly as it will be dialed including any prefix for a PBX and area codes.
PIN Code 1: This four-digit code serves as the voice mode unit ID and also as a passcode to autodial the
PIN 1 Dial Number. When the phone is set-up (by GAI-Tronics) to provide unit location transmission on
voice call connection (ANI), PIN Code 1 is the location ID that will be sent by the phone (via DTMF) to
identify itself. With this operation, the system manager will select a unique PIN Code 1 for each phone in
the system. In addition, this four-digit number serves as a PIN dial code: when the phone receives this
DTMF digit string, the phone will, under certain conditions, dial the telephone number stored in PIN 1
Dial Number. This PIN code must contain four digits.
PIN 1 Dial Number: This is the first of two of the PIN memory numbers. Each can hold 24 digits in the
range 0–9. The phone will dial this number when access is granted via PIN Code 1.
PIN Code 2: This four-digit code acts as a passcode to autodial the PIN 2 Dial Number. When the phone
receives this DTMF digit string, the phone will, under certain conditions, dial the telephone number
stored in PIN 2 Dial Number.
PIN 2 Dial Number: This is the second of the two PIN memory numbers. Each can hold 24 digits in the
range 0–9. The phone will dial this number when access is granted via PIN Code 2.