Call-in – GAI-Tronics TMA Version 7.5.0 Telephone Management Application (TMA) User Guide (Ver. 7.5.0 and newer) User Manual
Page 51
Pub. 42004-479B
Telephone Management Application (TMA) User Guide
Page 48 of 128
e:\standard ioms - current release\42004 instr. manuals\42004-479b.doc
03/14
Call-In
The Call-In tab on the Phone Properties sheet is shown below.
Call-In Configuration Properties
Call-In Status Allows you to set the phone's call-in frequency. The drop down box contains the
following choices: Daily, Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, and Saturday.
A drop down box allows you to select Disable, On Fault, and Enable. Enable and Disable turns the
call-in process on and off. The fault conditions are determined by the settings entered on the Fault and
Sensor screens.
Call-In Time Sets the time of day that the phone calls the TMA. Use the up and down arrows to set the
desired time. The Call-In Time can be set in one minute increments.