GAI-Tronics TMA Version 7.5.0 Telephone Management Application (TMA) User Guide (Ver. 7.5.0 and newer) - Manual (Page 52)

Pub. 42004-479B
Telephone Management Application (TMA) User Guide Page 49 of 128
e:\standard ioms - current release\42004 instr. manuals\42004-479b.doc
03/14
Memories
The Memories tab on the Phone Properties sheet is shown below.
Memory Configuration Properties
The Memories tab contains the phone’s 20 memory numbers. Memory numbers can be paired to perform
Time Switching. If the phone is programmed for Time Switching, the primary numbers are active
between the Primary Start and Primary End times. The memories are only applicable to autodialing
versions of S.M.A.R.T. telephones. The Memories screen is shown below.
N OTE : Memories on autodialers will start from memory 1, i.e. the top button is 1, and the bottom of a
three button dialer will be memory 3.
Memory Numbers The Memory Numbers range from 1 through 20. A primary memory and a
secondary memory number can be entered so that the number to be dialed can be switched in accordance
with the time periods that have been entered. The number switching occurs at the Primary Start and
Primary End times. Time Switching can only be programmed using the following memory number
pairs:
1 and 11 6 and 16
2 and 12 7 and 17
3 and 13 8 and 18
4 and 14 9 and 19
5 and 15 10 and 20