GAI-Tronics TMA Version 7.5.0 Telephone Management Application (TMA) User Guide (Ver. 7.5.0 and newer) - Manual (Page 82)

Pub. 42004-479B
Telephone Management Application (TMA) User Guide Page 79 of 128
e:\standard ioms - current release\42004 instr. manuals\42004-479b.doc
03/14
Table 25. Status Report Selection Criteria
Selections Function
Fields Selections in the “Fields” drop-down box are used to select criteria for the call-in report.
Criteria The “Criteria” drop-down area contains two drop-down boxes. The first is a logical
operator; the second is a data field with selections based on (or limited to) criteria
selected in the Fields drop-down box.
Criteria 2 Selections in “Criteria 2” are limited to
And
or
Or
operators to limit the report to a
range of criteria. The “Criteria 2” operator is not required. If selected, a second, third
or fourth set of “Fields” and “Criteria” are presented for selection.
Order By The “Order By” drop-down box contains the same selections as the “Field” drop-down
box. A selection made in this box determines the sort order for the report.
Group By The “Group By” drop-down box contains the same selections as the “Field” drop-down
box. A selection made in this box determines where breaks occur in the report.
Asc When selected, the report lists phones in an ascending order.
Desc When selected, the report lists phones in a descending order.
Buttons Function
OK Saves the selections and closes the window.
Cancel Selections are not saved and the window closes.
Apply Selections are saved and the window remains open to permit additional selections
and/or changes.
Reset Selections are cleared and the window remains open.