Polling setup form, Filter field – GAI-Tronics TMA Version 7.5.0 Telephone Management Application (TMA) User Guide (Ver. 7.5.0 and newer) User Manual
Page 62
Pub. 42004-479B
Telephone Management Application (TMA) User Guide
Page 59 of 128
e:\standard ioms - current release\42004 instr. manuals\42004-479b.doc
03/14
After clicking on the Polling Setup selection, the Polling Setup Form will appear.
Polling Setup Form
The Polling Setup Form is composed of five areas, which are the Filter Field, Available Phones, Polling
List, Polling Controls and Add/Remove buttons.
Filter Field
The Filter field is a drop-down box used to determine what phones are displayed in the Available Phones
list. Selections in the drop-down box are based on the Level 1/Level 2/Level 3 name conventions
assigned in the System Phone Tree, as shown on the previous page.
To display a particular group of phones, select the Level 1/Level 2/Level 3 name convention from the
list. To display all system phones, select
All
.
Available Phones
Polling List
Polling
Control
Area
Add/Remove Buttons
Filter Field