Available phones list, Polling list, Add/remove buttons – GAI-Tronics TMA Version 7.5.0 Telephone Management Application (TMA) User Guide (Ver. 7.5.0 and newer) User Manual
Page 63
Pub. 42004-479B
Telephone Management Application (TMA) User Guide
Page 60 of 128
e:\standard ioms - current release\42004 instr. manuals\42004-479b.doc
03/14
Available Phones List
The Available Phones list displays the phones and phone templates (saved in the database) based on the
field selection made in the Filter field. The list does not indicate whether a phone is active or inactive.
Polling List
The Polling list displays the telephone(s) selected from the Available Phone list that are to be polled.
Telephones are either added or removed by using the Add or Remove buttons.
Add/Remove Buttons
The Add/Remove buttons are used to add or remove phones (listed on the Available Phone list) to the
Polling list. The four buttons are: “Add,” “Add All,” “Remove,” and “Remove All” and are shown
below.
Add
button – is used to add a phone to the Polling List.
Add All
button – is used to add all phones to the Polling List.
Remove
button – is used to remove a phone from the Polling List.
Remove All
button – is used to remove all phones from the Polling List.