GAI-Tronics TMA Version 7.5.0 Telephone Management Application (TMA) User Guide (Ver. 7.5.0 and newer) - Manual (Page 57)

Pub. 42004-479B
Telephone Management Application (TMA) User Guide Page 54 of 128
e:\standard ioms - current release\42004 instr. manuals\42004-479b.doc
03/14
General Properties
Tag ID – Tag ID is the site identification label for the telephone. The field is limited to 24 alphanumeric
characters and should be unique and easily recognized. This ID appears on TMA reports, but is not stored
in the telephone memory.
Description – Description is name entered (or assigned) to the telephone in the phone tree list that will
appear on TMA screens and reports.
Phone Type – Phone Type specifies the type of telephone installed and determines the telephone settings.
This property is stored only in the TMA database.
Board Type - Board Type identifies which family of Printed Circuit Boards (PCB) is currently being
used in the telephone at the time of manufacture and cannot be changed.
Board Serial – The Board Serial is a unique identifier for the PCB installed at the time of manufacture
and cannot be changed.
Unit Type - Unit Type identifies the type of unit currently being used at the time of manufacture and
cannot be changed.
Unit Serial – The Unit Serial is programmed into every telephone during manufacture and is read by
TMA. This field is an important identifier during polling, and cannot be changed.
MAC Address - The MAC Address is programmed into every telephone during manufacture and is read
by TMA. This field is an important identifier during polling, and cannot be changed.
Version - Version identifies the firmware installed in the telephone at the time of manufacture and cannot
be changed.
Out of Service – The Out of Service checkbox allows the phone to manually be tagged ‘Out of Service’
in the event that the phone should no longer be automatically polled. This property is stored only in the
TMA database.