MultiDyne ACI-2058 User Manual
Page 127
Advertising
Chapter 8: Tools
A54-3000-100 A
88
A
PCON
, Inc.
Color calibration
Specifies the color that displays for various signal strengths.
Set the slider to the minimum signal strength required for
transmission. Check your transceiver manufacturer specifications
for acceptable signal strengths.
After you set the slider, signals display as follows:
• Green: The transceiver is receiving enough signal to properly
transmit.
• Red gradient: The transceiver is not receving enough signal to
properly transmit. The darker the color, the lower the signal.
• Black: The transceiver either does not receive signal or no
transceiver exists.
Field
Description
Advertising