Appendix a: data file formats, A.1. sample syslog file, A.1.1. format – MultiDyne ACI-2058 User Manual
Page 183: Sample syslog file, Format, Data file formats, Appendix a
A54-3000-100 A
144
A
PCON
, Inc.
A.1.
Sample SysLog File
For information about setting up your switch to write events to a SysLog, see the Enable
Remote Syslog option in
Events written to a logfile include:
•
Powering on or off a blade.
•
Patching or unpatching a port.
•
Naming a port.
•
Storing, recalling, naming, or getting the name of a preset configuration.
•
Setting the data rate, duplex setting, or MDI/MDIX status of a port.
•
Setting the TCP/IP parameters of the I
NTELLA
P
ATCH
switch.
•
Setting the device number of the I
NTELLA
P
ATCH
switch.
•
Enabling or disabling the Telnet interface, or its secure (SSH) variant.
•
Enabling a remote SysLog file, or getting or setting the IP address of the computer to
which to write it.
•
Requiring secure logins.
•
Resetting the I
NTELLA
P
ATCH
switch to its factory defaults.
•
Specifying an event type(Facility) and importance (Severity). For details about available
choices, see the Facility/Severity option on the Event Log screen. For details about this
screen, see page 82.
A.1.1.
Format
The messages consist of:
[date] [serverIP] [switchname] apcond/[service]: [action]|b:[blade]
p:[port] u:[user]@[IP] [string]
— OR —
[date] [serverIP] [switchname] apcond/[service]: [action]|b:[blade]
p:[port] u:[user]/[remoteIP]@[IP] [string]
Appendix A
Data File Formats
Appendix A
For information about...Go to this page...
......................................................................................... 147
............................................................................................ 148