Grass Valley K2 Storage System Instruction Manual v.3.2 Aug.01 2007 - Manual (Page 136)

136 K2 Storage System Instruction Manual July 3, 2007
Chapter 4 Installing the Level 3 Storage System
9. Click Modify Selected Ports .
10.Make sure Port Enabled is set to Yes , leave Mode as default of Auto .
11.Set Flow Control as follows:
- For the 3400cl series switch, set to Disable .
- For the 2900 series switch, set to Enable .
If you have both 3400cl series and 2900 series on your network, having different
Flow Control settings (disable for 3400cl, enable for 2900) does not cause
problems.
12.Click Apply Settings . Wait until settings are applied and the Web interface
becomes active.
13.Choose VLAN Configuration . If prompted, log in with the switch’s administrator
username and password.
This setting varies
depending on
switch model. Set
as instructed in
text.