Configuring the server - part 1 – Grass Valley K2 Storage System Instruction Manual v.3.2 Aug.01 2007 User Manual
Page 53
July 3, 2007
K2 Storage System Instruction Manual
53
Configuring the server - Part 1
Storage System, as described in the following table:
On this page…
Do this…
Define server roles
Enter the name or IP address for the K2 Media Server, as currently
configured on the machine.
For Level 2, leave all roles selected.
Click
Next
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
Software required on the
Level 2 K2 Media Server is
as follows:
•
SQL Server
•
K2 Server
•
File System Server
•
File System Client
•
SNMP Services
•
QuickTime
If software with Yes in the Required column reports as Not Installed, you
must first install it on the K2 Media Server before continuing. Refer to
Managing K2 software. After installing the software, click
Check Software
. When all required software reports as Installed, click
Next
.