Grass Valley K2 Storage System Instruction Manual v.3.2 Aug.01 2007 - Manual (Page 64)

64 K2 Storage System Instruction Manual July 3, 2007
Chapter 2 Installing the Level 2 Storage System
3. Power-off the primary RAID controller chassis. If expansion chassis are
connected, make sure the power-off of the controller chassis is prior to or
simultaneous with the power-off of its connected expansion chassis. Wait
approximately 30 seconds for the disk drives to spin down before proceeding.
4. Power-off all Ethernet switches.
5. Power-off the control point PC and/or the NetCentral server PC, if necessary.