Grass Valley K2 Storage System Instruction Manual v.3.2 Aug.01 2007 - Manual (Page 275)

July 3, 2007 K2 Storage System Instruction Manual 275
Configuring remaining servers
Server select the File System Server node.
The File System Server Configuration page appears.
b. Click Check and verify that the V: drive is shared. This is required for NAS
server functionality.
Configuring remaining servers
On Nearline systems, all K2 Media Servers are identical, with the exception that only
one server can be the active media file system server at any time. For this reason the
K2 System Configuration application embeds the configuration and start of the media
file system into the wizard when you configure the first K2 Media Server, as in the
previous procedure. That server is now the acting media file system server. If you
have more than one K2 Media Server, you can now configure the remaining servers
using the following procedure.
1. In the K2 System Configuration application tree view, select the K2 Media Server
you are configuring.
2. Click the Configure button. The Configure K2 Server wizard opens. Follow the
on-screen text to configure the server for a nearline K2 Storage System, as
described in the following table. Some screens require no input from you, as they
are based on the configurations already completed on a previously configured K2
Media Server.
On this page… Do this…
Define server roles
Enter the name or IP address for theK2 Media Server, as currently
configured on the machine.
For Nearline server roles, selections are disabled. Leave
SNFS file
system server , FTP server , and NAS server selected.
Click Next