Grass Valley K2 Storage System Instruction Manual v.3.2 Aug.01 2007 - Manual (Page 325)

July 3, 2007 K2 Storage System Instruction Manual 325
Modifying K2 Storage System settings
Modifying K2 Storage System settings
Use the procedures in this section when changing settings on an existing K2 Storage
System. These are the settings that define the K2 Storage System. Procedures are as
follows:
• “Accessing K2 Storage System features” on page 325
• “Renaming a K2 Storage System” on page 325
• “Adding devices to a K2 Storage System” on page 326
• “Removing a K2 Storage System” on page 327
• “Accessing a K2 Storage System from multiple PCs” on page 328
• “Reconnecting to a K2 Storage System” on page 329
• “Taking a K2 Storage System offline” on page 329
• “Bringing a K2 Storage System online” on page 329
Accessing K2 Storage System features
In the K2 Configuration Application, features for modifying K2 Storage System
settings are as follows:
Renaming a K2 Storage System
The requirements for renaming an existing K2 Storage System are as follows:
• You must be logged in to the K2 System Configuration application with
permissions equivalent to K2 administrator or higher.
• The devices of the K2 Storage System do not need to be offline, and there is no
restart of devices required.
To rename an existing K2 Storage System, do the following:
1. In the tree view, select the current name of the K2 Storage System, which is the top
node of the storage system tree.
2. Click Rename . The Rename dialog box opens.
3. Enter the new name of the storage system and click Apply .
Select the K2
Storage System... To make these
features available.