Chapter 2 installing the level 2 storage system – Grass Valley K2 Storage System Instruction Manual v.3.2 Aug.01 2007 User Manual
Page 42
Advertising
42
K2 Storage System Instruction Manual
July 3, 2007
Chapter 2 Installing the Level 2 Storage System
Do not swap Expansion chassis or otherwise reconfigure storage. If you connect a
L2 RAID Expansion chassis to the wrong controller such that the Expansion
chassis contains disk modules that were bound using a different controller you will
lose your media file system.
Set the chassis address to 1 on both
L2 RAID Expansion adapters.
1
Chassis
Address = 1
ID = "0"
4 3
2 1 ON
Advertising