Grass Valley K2 Storage System Instruction Manual v.3.2 Aug.01 2007 - Manual (Page 87)

July 3, 2007 K2 Storage System Instruction Manual 87
Setting up the L2 RAID chassis
Do not swap Expansion chassis or otherwise reconfigure storage. If you connect a
L2 RAID Expansion chassis to the wrong controller such that the Expansion
chassis contains disk modules that were bound using a different controller you will
lose your media file system.
Set the chassis address to 1 on both
L2 RAID Expansion adapters.
1
Chassis
Address = 1
ID = "0"
4 3 2 1 ON