Grass Valley K2 Storage System Instruction Manual v.3.2 Aug.01 2007 - Manual (Page 220)

220 K2 Storage System Instruction Manual July 3, 2007
Chapter 5 Installing the Level 3R Storage System
are based on the configurations already completed on a previously configured K2
Media Server.
On this page… Do this…
Define server roles
Enter the name for the K2 Media Server. This should be the current
network name of the machine.
For Level 3 redundant, select iSCSI bridge, FTP server, and NAS server.
Click
Next
Software Configuration
This page checks for the
software required to support
the roles you selected on the
previous page.
Software required on a Level
3R K2 Media Server 2A is as
follows:
• K2 Server
• File System Client
• QuickTime
If software with Yes in the Required column reports as Not Installed, you
must first install it on the K2 Media Server before continuing. Refer to
Chapter 9, Managing K2 software. After installing the software, click
Check Software . When all required software reports as Installed, click
Next .