Emerson Liebert CRV 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 C R 0 2 0 R A 1 C 7 S D 1 8 1 1 E L 1 0 P A - Manual (Page 82)

Liebert iCOM ® Control
Liebert ® CRV ™ 74
Figure 62 Wellness basic settings screen- Page 1
Maintenance Frequency Per Year—This parameter sets the number of expected maintenance
visits in a one year time span.
Max Bonus—This parameter will increase the time to the next maintenance cycle. A bonus should be
assigned when a service visit finds that all components are working optimally.
Max Penalty—This parameter will decrease the time to the next maintenance cycle. A penalty
should be used when a service visit finds excessive wear on components.
Last Maintenance—This parameter is set during the service call. It also indicates to other service
personnel the date of the last visit.
Service Engineer—This parameter provides a label for the service representative to list either the
company name or representative’s name.
Confirm PM—This parameter confirms that the service representative has completed the preventive
maintenance and resets the next maintenance date.
Calculated Next Maintenance—This parameter provides a date to when the next expected
maintenance should take place based on the last confirmed PM, component starts, run hours and the
penalty / bonus currently set in the Liebert iCOM ® control.
S001
S002
S003
S004
S005
S006
S007
S008
S009
S010
S011 PASSWORD (Actual Level 0) ????
Maintenance Frequency Per Year 1
Max Bonus 0
Max Penalty 0
Last Maintenance 06/14/2010
Service Engineer Nobody
Confirm PM No
Calculated Next Maintenance 06/2011
WELLNESS basic settings (page 1 of 5) SYSTEM
to change parameter
for next/previous unit to select parameter
to confirm then