Xylem IM255 AQUAVAR Intelligent Pump Controller - Manual (Page 25)

Motor connection for A4 and A5
1. Terminate the motor earth.
2. Place motor U, V and W wires in terminal and tighten.
3. Ensure that the outer insulation of the motor cable is removed under the EMC clamp.
Motor connection for B1 and B2
1. Terminate the motor earth.
2. Place motor U, V and W wires in terminal and tighten.
3. Ensure that the outer insulation of the motor cable is removed under the EMC clamp.
Electrical Installation
Aquavar ® Intelligent Pump Controller INSTRUCTION MANUAL 23