Xylem IM255 AQUAVAR Intelligent Pump Controller User Manual
Page 45
Figure 28: Default configuration
1. Controller Status
2. Motor HP (Parameter 0-20)
3. Motor Frequency (Parameter 0-21)
4. Motor Current (Parameter 0-22)
5. Feedback/Actual Pressure or process variable (Parameter 0-23)
6. Setpoint (Parameter 0-24)
7. Menu keys
8. Navigation keys
9. Operation keys
10. Status lights
The parameters shown are the factory default settings. To display other values, modify
parameters 0–20, 0–21, 0–22, 0–23, or 0–24.
Controller status
The controller status line shows operational information about the controller.
The first word in the status line shows the Operation Mode. The table below defines the
Operation Mode status.
Off
The controller does not react to any control signal until
[Auto On] is pressed.
Auto On
The controller is controlled from the control terminal
and/or the serial communication.
Electrical Installation
Aquavar
®
Intelligent Pump Controller INSTRUCTION MANUAL
43