Yokogawa digitalYEWFLO (DY) - Manual (Page 139)

<13. GENERAL SPECIFICATIONS>
13-29
IM 01F06A00-01EN
 Reduced Bore Type (/R1): DY200/R1
 Flange type
87.5 (3.44) 103.5 (4.07)
H
H1
125 (4.29)
T
L
ø
D
59 (2.32)
74 (2.91)
59 (2.32)
4.5(0.18)
ø
94 (3.70)
øJ
øCS
øC
N- øG
WITH INDICATOR
ELECTRICAL
CONNECTION
EARTH TERMINAL
Locking Screw
Only for the following
explosion protected type
Flameproof
(TIIS, ATEX, IECEx)
TYPE INTEGRAL/REMOTE
MODEL CODE DY200/R1
PROCESS
CONNECTION BJ1 BJ2
BA1
BS1 BA2
BS2
L 310 (12.20)
C 185.6 (7.31)
CS 138.8 (5.46)
D 330 (12.99) 350 (13.78) 342.9 (13.50) 381 (15.00)
H
Shedder Bar Material: L, E, X 477.5 (18.80) 487.5 (19.19) 484 (19.06) 503 (19.80)
Shedder Bar Material: B 484.5 (19.07) 494.5 (19.47) 491 (19.33) 510 (20.08)
H1
Shedder Bar Material: L, E, X 209 (8.23)
Shedder Bar Material: B 216 (8.50)
T 22 (0.87) 30 (1.18) 28.4 (1.12) 41.1 (1.62)
J 290 (11.42) 305 (12.01) 298.5 (11.75) 330.2 (13.00)
N 12 12 8 12
G 23 (0.91) 25 (0.98) 22.4 (0.88) 25.4 (1.00)
WEIGHT kg (lb) 58.7 (129.4) 74.1 (163.4) 70.7 (155.9) 102.9 (226.9)
(Note 1) Integral weight is the same as Remote.
(Note 2) In case of with Indicator, add 0.2kg.
(Note 3) The fl ow direction is opposite (right to left when facing onto indicator) in case of code/CRC.
Unit : mm
(approx. inch)