Yokogawa digitalYEWFLO (DY) - Manual (Page 85)

<9. OPERATION VIA HART CONFIGURATION TOOL (HART 7)>
9-13
IM 01F06A00-01EN
NOTE
A new HART revision number is displayed on
the integral indicator for three seconds after
restart the device. (Refer to Section 9.2 “HART
Confi guration Tool and Matching of Device
Revision”)
(5) Confi rming the new protocol revision
a. Restart the HART confi guration tool
NOTE
When execute the other parameter confi rmation
or setting change, execute after restart the
confi guration tool.
b. Confi rm the new HART protocol revision
number
Call up the Universal rev parameter, and confi rm
that the new HART revision number is displayed.
• Procedure to call up the Universal rev.
parameter.
DD (HART 5/7)
DTM (HART 7)
[Root Menu] → Detailed setup →
Device information → Revision numbers →
Universal rev →
DTM (HART 5) [Root Menu] → Confi guration →
HART → Universal rev. →
5 HART protocol revision: 5
7 HART protocol revision: 7
9.10.7 Other Operations for the HART
Confi guration Tool
Regarding other operations for the HART
Confi guration Tool, refer to the HART Confi guration
Tool operations manual.