NORD Drivesystems BU0750 - Manual (Page 135)

8 Error messages
BU 0750 GB-3311 Subject to technical amendments 135
Display Fault Cause
 Remedy Group Details in
P700 / P701
E008 8.0 EEPROM parameter loss
Error in EEPROM data
 Software version of the stored data set not
compatible with the software version of the FI.
Note: Faulty parameters are automatically
reloaded (default data).
 EMC interferences (see also E020)
8.1 Invalid inverter type  EEPROM faulty
8.2 External EEPROM copy error
(ControlBox)  Check ControlBox for correct position.
 ControlBox EEPROM faulty (P550 = 1).
8.3 Customer unit type incorrect
8.4 Database number incorrect
8.7 Original and reflection are not
identical
E009 --- ControlBox error SPI Bus faulty, no communication with
ControlBox.
 Check ControlBox for correct position.
 Switch mains voltage off and on again.