3 scope of supply – NORD Drivesystems BU0750 User Manual
Page 7
1. General information
BU 0750 GB-3311
Subject to technical amendments
7
1.3 Scope of supply
Standard version:
State the protection class, IP54 (air cooling) / (IP65 water cooling as special
version)
→ when ordering!
Integrated brake chopper
Integrated EMC line filter for limit curve A as per EN55011
Blank cover for the 1st and 2nd technology unit slots
Shield angle
Operating Instructions
Available accessories: Brake resistor with high protection class on request, otherwise as for SK 700E
(IP20)
Interface converter RS232
RS485 (additional description BU 0010)
NORD CON, PC parameterisation software
<
ParameterBox, external control panel with LCD plain text display, connection cable
(supplementary description BU 0040 DE)
Technology Unit:
SK TU2-CTR, ControlBox
detachable control panel, 4 figure 7 segment LED display, keyboard
SK TU2-POT, PotentiometerBox
Additional module with switch (R/L) and infinitely variable potentiometer
SK TU2-PBR, Profibus, additional module for Profibus communication (1.5MBaud)
SK TU2-PBR-24V, with external 24V supply (12MBaud)
SK TU2-PBR-KL, Connection to terminal bar with cover (1.5MBaud)
SK TU2-CAN, CANbus, additional module for CANbus communication
SK TU2-CAO, CANopen, bus switching
SK TU2-DEV, DeviceNet, bus switching
SK TU2-IBS, InterBus, bus switching
SK TU2-AS1, AS interface, bus switching
NOTE:
Additional bus manuals are available
–
BU 0020 … BU 0090..
>>>
<<<
Customer interfaces:
SK CU1-BSC, basic I/O, limited scope for signal processing
SK CU1-BSC, standard I/O, moderate scope for signal processing
SK CU1-MLT, multi-I/O, high level of scope for signal processing
SK CU1-MLT-20mA, multi-I/O, high level of scope for signal processing
SK CU1-CAN, CANbus I/O, bus switching via the CANbus
SK CU1-PBR, Profibus I/O, bus switching via Profibus DP
Special extension units:
SK XU1-POS, PosiCon I/O, positioning module
(Supplementary instruction BU 0710 GB)
SK XU1-ENC, Encoder I/O, incremental encoder input for speed control