NORD Drivesystems BU0750 - Manual (Page 75)

5 NORD CON software
BU 0750 GB-3311 Subject to technical amendments 75
Oscilloscope function
The function to be recorded can be selected
from various channel settings. A total of 4
channels are available and are scaleable in
both time and value range.
The curves can be saved and archived with
the respective settings and called up at a later
time.
Parameterisation
All the connected frequency inverter
parameters can be read, edited, saved or
printed for documentation with NORD
CON.
All frequency inverter parameters can be
easily accessed via the parameter name
and the corresponding parameter number.
This means that parameterisation with the
PC software NORD
CON is very
transparent and therefore handling is
considerably easier.
In addition, the parameter characteristics
are available and it is possible to narrow
down the displayed parameters.
Macros
Macros enable simple process flows to be
created for test purposes. This can be
very useful, for instance, for testing during
commissioning of a frequency inverter.