4 operation and display – NORD Drivesystems BU0750 User Manual
Page 55
BU 0750 GB-3311
Subject to technical amendments
55
4 Operation and display
There are various solutions for control of the SK 750E, dependent upon application. When used on site at the
device, the handheld version of the ParameterBox can be connected directly via an M12 connector. As well
as control and parameterisation of the frequency inverter, this also enables operating values to be displayed
and datasets to be saved (see also Section. 4.2‚ ParameterBox, handheld version).
For permanent fixed installation in a control panel, the ParameterBox is also available as an installation
version. The functionality is equivalent to that of the handheld type (see also Section 4.3 ParameterBox,
Installation version).
M12 socket
→
Standard in device
All NORDAC frequency inverters can be controlled and parameterised using the free NORD CON software. In
conjunction with a laptop or PC, this provides diagnosis tools for simple drive optimisation. Parameter sets and
oscillograms can be saved, edited and archived. Further information can be found in Section 5 "NORD CON
software".
Website for downloading NORD CON: >
<