NORD Drivesystems BU0750 - Manual (Page 64)

NORDAC SK 750E Manual
64 Subject to technical amendments BU 0750 GB-3311
Menu structure of the ParameterBox
The menu structure consists of various levels which are each arranged in a ring structure. The ENTER key
( ) moves the menu on to the next level. Simultaneous operation of theSELECTION keys ( and )
moves the menu back one level.
Parameter 1
management
P1201 2
Copy - Source
P1202 2
Copy - Target
P1204 2
Load default values
P1203 2
Copy - Start
P1205 2
Delete memory
P0 2
Back
Parameterisation 1
Display 1
P1001 2
Bus scan
P1002 2
FI selection
P1004 2
Values for display
P1003 2
Display mode
P1005 2
Standardisation factor
P0 2
Back
Options 1
P1301 2
Language
P1302 2
Operating mode
P1304 2
Contrast
P1303 2
Automatic bus scan
P1305 2
Set password
P1306 2
Box password
P0
zurück
750E 11.0kW/3 POS STD
1
Fi/Hz U/V I/A
45.0 360 2.4
ONLINE FI P1 R RUNNING
U1 U2 U3 U4 U5
1 - - - -
OK - - - -
100
P1307 2
Reset box parameter
P0 2
Back
P0
zurück P1308 2
NORDAC p-box
Version 3.4 R1
Basic parameters 2
>OK< (to level 3 )
P0 2
Back
Inverter menu structure,
depending on installed
options
(e.g. posicon, ...)
 Section 7
Parameterisation
Motor data 2
>OK< (to level 3 )
Operating displays 2
>OK< (to level 3 )
ATTENTION The parameters of the menu groups >Display< (P10xx), >Parameter Management< (P12xx) and
>Options< (P13xx) in level 1 are exclusively ParameterBox parameters and do not have anything
to do directly with the frequency inverter parameters.
Access to the frequency inverter menu structure is gained via the >Parameterisation<
menu. The details depend on the customer units (SK CU1-...) and/or special extension
units (SK XU1-...) connected to the inverter. The description of parameterisation begins in
Section 5 "Parameterisation".