Festo Контроллер двигателя CMMD-AS - Manual (Page 103)

6. Electrical installation
Festo P.BE-CMMD-AS-HW-EN 1002NH 103
6.3 Entire system CMMD-AS
An entire system with the CMMD-AS motor controller system is shown in
220H
Fig. 6.4.
To operate the motor controller, the following components are needed:
Components - 24V power supply unit for control voltage supply
(see chapter A.3.2)
- Power supply (see Chapter A.3.2)
- Motor controller CMMD-AS
- Motor EMMS-AS
- Cable set consisting of motor and encoder line NEBM-
A PC with a serial connection cable is required for parameterizing.