Festo Контроллер двигателя CMMD-AS User Manual
Page 16
2. Safety instructions for electric drives and controllers
16
Festo P.BE-CMMD-AS-HW-EN 1002NH
Warning
The environmental conditions specified in the product
documentation must be observed.
Safety-critical applications are not permitted if they are not
explicitly approved by the manufacturer.
For instructions on safe and EMC-compliant installation,
see chapter
6.5 "Instructions on safe and EMC-compliant
The manufacturer of the system or machine is responsible for
ensuring that the limit values required by the national regulations
are observed.
Warning
The technical data and connection and installation conditions for
the motor controller must be taken from this product manual and
complied with.
Warning
DANGER!
The general installation and safety regulations for working on
high-voltage systems (e.g. DIN, VDE, EN, IEC or other national
and international regulations) must be observed.
Failure to observe these regulations can lead to bodily injury, death
or considerable damage to property.
The following precautionary measures also apply without claim to
completeness:
VDE 0100
Regulations for setting up high-voltage systems
up to 1,000 volts
EN 60204-1
Electrical equipment for machines
EN 50178
Equipping high-voltage systems with electronic
devices
EN ISO 12100
Safety of machines – basic concepts,
general guidelines
EN ISO 14121-1 Safety of machines – guidelines for risk
evaluation
EN 1037
Safety of machines – avoiding unintentional
starting up
EN ISO 13849-1 Safety-related parts of controllers