Festo Контроллер двигателя CMMD-AS - Manual (Page 22)

2. Safety instructions for electric drives and controllers
22 Festo P.BE-CMMD-AS-HW-EN 1002NH
2.4.7 Protection when handling and assembling
Handling and assembling certain components in an unsuitable manner can cause injury
under unfavourable circumstances.
Warning
DANGER!
Danger of injury as a result of incorrect handling
Bodily injury caused by squeezing, cutting, impact!
The following safety measures apply here:
Warning
Observe the general regulations on setting up and safety when
handling and mounting.
Use suitable mounting and transport devices.
Take suitable measures to prevent clamping and squashing
of fingers.
Use only suitable tools. If specified, use special tools.
Use lifting devices and tools in a correct manner.
If necessary, use suitable protective equipment
(e.g. protective glasses, safety shoes, safety gloves).
Do not stand under hanging loads.
Wipe up spilled liquids on the floor to avoid slipping.