Festo Контроллер двигателя CMMD-AS - Manual (Page 21)

2. Safety instructions for electric drives and controllers
Festo P.BE-CMMD-AS-HW-EN 1002NH 21
Warning
DANGER!
Dangerous movements!
Danger of injury or death, serious bodily injury or material damage.
For the above-mentioned reasons, the protection of human beings must be ensured with
the aid of monitoring systems or by measures which are of higher order than the system.
These measures are foreseen depending on the specific features of a danger and error
analysis by the system manufacturer. The safety regulations applicable to the system
must be observed here as well. Undesired movements of the machine or other incorrect
functions can occur as a result of switching off, avoiding or failing to activate safety
devices.
2.4.6 Protection aganst touching hot components
Warning
DANGER!
Surfaces of the device housing may be hot (up to approx. 85 °C,
see chapter 8)!
Danger of injury! Danger of burning!
Warning
Danger of burning!
Do not touch the surface of the housing in the vicinity of heat
sources.
After switching devices off, leave them for 10 minutes to cool
down before touching them.
If you touch hot parts of the device such as the housing, which
contains the heat sink and resistors, you may burn yourself.