Festo Контроллеры двигателя CMMS-ST - Manual (Page 53)

3. Product description
Festo.P.BE-CMMS-ST-G2-HW-EN 1008NH 53
- Start delay
- Final speed
- Wait for current positioning, reject or ignore initial instruction.
From every position record, any other position record can be started directly. You can
transition to a new position record without first coming to a standstill.
The parameter sets can be called up via:
- Digital inputs (position record 0 ... 63)
- RS232 interface (for test purposes only) or a
- Fieldbus interface
.
Required I/O connection for positioning
The connection plan shows the switch position in the active operating state.
*) The limit switches are set by default to opener (configuration over FCT)