Speed profiles with end speed <> 0, Activation of record linking – Festo Контроллеры двигателя CMMS-ST User Manual
Page 73
Advertising
![background image](/manuals/464486/73/background.png)
3. Product description
Festo.P.BE-CMMS-ST-G2-HW-EN 1008NH
73
Speed profiles with end speed <> 0
Note
Position record profiles that contain an end speed <> 0 must NOT be
used for individual records, since the drive would continue to run
uncontrolled.
Activation of record linking
Record linking is started in I/O operation through selection of mode 2.
Advertising