Ip ospf authentication [message-digest | null – ADTRAN 5000 Series User Manual
Page 1003

Command Reference Guide
Tunnel Configuration Command Set
61200990L1-35E
Copyright © 2005 ADTRAN
1003
ip ospf authentication [message-digest | null]
Use the ip ospf authentication command to authenticate an interface that is performing OSPF
authentication.
Syntax Description
message-digest
Optional. Selects message-digest authentication type.
null
Optional. Specifies that no authentication is used.
Default Values
By default, this is set to null (meaning no authentication is used).
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 3.1
Command was introduced.
Release 9.1
Command was expanded to include tunnel interfaces.
Usage Examples
The following example specifies that no authentication will be used on the tunnel interface:
(config)#interface tunnel 1
(config-tunnel 1)#ip ospf authentication null