ADTRAN 5000 Series - Manual (Page 804)

Command Reference Guide HDLC Command Set
61200990L1-35E Copyright © 2005 ADTRAN 804
dial-backup redial-delay <seconds>
Use the dial-backup redial-delay command to configure the delay after an unsuccessful call until the call
will be re-tried. For more detailed information on PPP dial-backup functionality, refer to the Functional
Notes and Technology Review sections of the command dial-backup call-mode [answer | answer-always |
originate | originate-answer | originate-answer-always]
on page 795 .
Syntax Description
<seconds> Specifies the delay in seconds between attempting to re-dial a failed backup
attempt. Range: 10 to 3600.
Default Values
By default, dial-backup redial-delay is set to 10 seconds.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1 Command was introduced.
Release 5.1 Command was expanded to include the PPP interface.
Usage Examples
The following example configures a redial delay of 25 seconds on this endpoint:
(config)#interface ppp 1
(config-ppp 1)#dial-backup redial-delay 25