Lldp receive – ADTRAN 5000 Series User Manual
Page 772
Advertising
Command Reference Guide
Frame Relay Sub-Interface Config Command Set
61200990L1-35E
Copyright © 2005 ADTRAN
772
lldp receive
Use the lldp receive command to allow LLDP packets to be received on this interface.
Syntax Description
No subcommands.
Default Values
By default, all interfaces are configured to send and receive LLDP packets.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 and Total Access 900 Series units.
Command History
Release 9.1
Command was introduced.
Usage Examples
The following example configures the Frame Relay sub-interface to receive LLDP packets:
(config)#interface frame-relay 1.16
(config-fr 1.16)#lldp receive
Advertising