ADTRAN 5000 Series User Manual
Page 256

Command Reference Guide
Enable Mode Command Set
61200990L1-35E
Copyright © 2005 ADTRAN
256
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000
and Total Access 900 Series units.
Command History
Release 1.1
Command was introduced.
Release 9.1
Command was expanded to include HDLC and tunnel interfaces.
Release 11.1
Demand, FXO, and serial interfaces were added. IP crypto and router pim-sparse
key words were added.
Usage Examples
The following is a sample output from the show running-config command:
>enable
#show running-config
Building configuration...
!
no enable password
!
ip subnet-zero
ip classless
ip routing
!
event-history on
no logging forwarding
logging forwarding priority-level info
no logging email
!
ip policy-timeout tcp all-ports 600
ip policy-timeout udp all-ports 60
ip policy-timeout icmp 60
!
interface eth 0/1........