ADTRAN 5000 Series - Manual (Page 236)

Command Reference Guide Enable Mode Command Set
61200990L1-35E Copyright © 2005 ADTRAN 236
show lldp neighbors statistics
Use the show lldp neighbors statistics command to display statistics about local loop demarkation point
(LLDP) neighbor table actions.
Syntax Description
No subcommands.
Default Values
There are no default values necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 8.1 Command was introduced.
Functional Notes
This command shows information about the changes in this device’s neighbor table. The information
displayed indicates the last time a neighbor was added to or removed from the table as well as the number
of times neighbors were inserted into or deleted from the table.
Usage Examples
The following example shows sample output for this command:
>enable
#show lldp neighbors statistics
System Last Change Time Inserts Deletes Drops Age outs
10-15-2004 14:24:56 55 3 1 1
System Last Change Time - Shows the time at which the most recent change occurred in the neighbor
table.
Inserts - Shows the number of times neighbors have been added to the table.
Deletes - Shows how many times neighbors have been deleted from the table because an interface was
shut down.
Drops - Shows how many times the insertion of a new neighbor into the table failed because the table was
full.
Age outs - Shows how many times neighbors have been removed from the table because no new updates
were received from that neighbor before its time-to-live timer expired.